Cleaning Plus carrys the complete line of PowerClean products. We have truckmounts, portables, and chemicals to meet your needs!

Truckmounts by Power Clean

Models described from left to right:

First, the Genesis 56/59. This powerful truckmount is the ultimate in performance. The Genesis 59 uses a powerful Roots 59 Blower to deliver in excess of 850 CFM of amazing drying power, more than double of what other manufacturers consider dual wand drying power! Improvements in existing heat exchangers allow for unbelievable temperatures
of 220°+ during dual wand operations. Just like the Genesis 56, the 59 can be ordered with the Cat 5CP Water Pump which provide pressure washing at 3000 PSI and 5 GPM for use on concrete, siding, decks, tile and even paint or graffiti removal. The Genesis 59 also features PowerClean Industries exclusive Genesis T.E.S. to reduce engine strain and wear while increasing the usable vacuum during long hose runs or when the unit is under load. The Genesis 59 was built to be the ideal commercial cleaning plant and flood restoration tool. No matter the size of the job the 59 is more than up to the task. Commercial cleaning with dual wands at distances of over 650' per wand or even three wand cleaning with hose runs of 400-450' per wand!

Second, the XT series! We managed to set some lofty goals for our XT-Series truck mounts and the all new Victory is the first unit to achieve those goals! The Victory incorporates our new Steady-Temp II, the industry's first Positive Flow Exhaust Diverter System, to achieve precise control of your water temperature without dumping and without some of the problems that less advanced, passive exhaust diverter systems incur. Hydraulic fittings replace hose clamps while
braided stainless steel hoses replace traditional pressure lines in this premium line of truck mounts. The Victory uses an active cooling system to exhaust heat out of the unit's engine compartment thereby achieving longer belt, pump, and engine life.

Third: The Patriot utilizes a powerful Ford 2.5 liter, 76 horsepower liquid cooled 4 cylinder engine that is equipped with our exclusive Genesis Torque Elimination System. This high performance engine features a ditributorless ignition system, Cast Iron "cross flow" cylinder heads, a cast iron crankshaft, an overhead camshft with roller followers,
a pressurized by-pass circulation coolant system and a pressurized lubrication system featuring oil mist and splash to cylinder walls and piston pins. Generating the vacuum for this beast is the near 500lb Roots 711 Blower. Spinning at speeds of up to 2100 RPM's, the Roots 711 delivers over 1200 CFM@16"Hg! That's right, 1200+CFM and 16"Hg at the same time... no other truckmount even comes close. In fact, that's over 50% more CFM and 25% more Hg then the competition's latest "performance" unit. The true test of a multi-wand system like the Patriot is how well it maintains heat. The Patriot is the first of our new truck mounts to utilize our all new Multi-Stage, Multi Source heat exchange system. Utilizing 3 sources and 7 different heating stages, the Patriot will maintain in excess of 240° temperatures for 2 wands and 200-220° temperatures for 3 wands! In a recent heat and water flow test the Patriot produced temperatures of 210° at over 6 GPM using an open hose.

Enter the all new Freedom 36

Continuing with our commitment to building machines that are equipped with liquid cooled engines. This Unit features an extremely powerful 25 H.P. Kohler Aegis engine with an amazing 3 year warranty, an ultra reliable cat pump and roots 36 blower capable of delivering up to 290 CFM and 15’ of lift. Heat is delivered utilizing a trouble free heat exchange system capable of 210-220 degree temperatures, and is also capable of pressure washing up to 2000 psi.

For those of you wanting a bit more vacuum you can opt for the Freedom 45, which features a powerful roots 45 blower that delivers as much as 365 CFM of drying Power.

Click here for portables!